Under normal use conditions, the service life of the Anti-glare LED Panel Light is affected by a combination of factors, and it is difficult to give an accurate fixed value, but it can be analyzed from the following aspects.
First, the quality of the LED chip is one of the key factors that determine the service life of the panel light. High-quality LED chips have better stability and durability. Generally speaking, the theoretical life of high-quality LED chips under normal use conditions (such as suitable temperature, voltage, etc.) can reach 50,000 hours or even higher. The normal use conditions here refer to the rated operating voltage range, usually AC 100-240 volts, and avoid frequent overvoltage shocks. In the Anti-glare LED Panel Light, the heat dissipation of the LED chip will also affect its life. If the heat dissipation design is good, the chip can work at a suitable temperature, which helps to extend the service life. For example, when the junction temperature of the chip can be stably controlled below 80℃, its aging rate will be significantly slowed down.
Secondly, the quality and performance of the driver power supply also have an important impact on the life of the panel light. The driver power supply is responsible for providing stable current and voltage to the LED chip. A reliable driver can ensure that the LED chip works under appropriate electrical parameters and avoid chip damage caused by overcurrent, overvoltage and other conditions. In normal use, if the driver is efficient, stable, and has over-temperature, over-current, and over-voltage protection, it can provide protection for the long-term stable operation of the panel light. Generally speaking, a high-quality driver can be used for more than 20,000-30,000 hours under normal use conditions.
Furthermore, the heat dissipation structure design of the lamp should not be ignored. Anti-glare LED Panel Light generates heat during operation, and a good heat dissipation structure can dissipate the heat in time. For example, the design of aluminum heat sink or heat dissipation fins can effectively improve the heat dissipation efficiency. If the heat dissipation is not good, the internal temperature of the lamp is too high, which will not only accelerate the aging of the LED chip, but also may affect the performance of other electronic components, thereby shortening the service life of the entire panel light.
In addition, the use environment will also affect the life of the Anti-glare LED Panel Light. In a normal indoor environment, such as when the temperature is between 18 - 25℃ and the relative humidity is between 40% - 60%, the service life of the panel light will be relatively long. However, if the lamp is often in a harsh environment with high temperature, high humidity or a lot of dust, such as a kitchen, factory workshop, etc., its life may be greatly shortened. For example, in a high temperature environment, the electronic components inside the lamp age faster, and in a dusty environment, dust may accumulate on the heat sink or the surface of the LED chip, affecting the heat dissipation effect.
Taking the above factors into consideration, in a normal indoor use environment, that is, with appropriate temperature, humidity, stable voltage, and reliable quality of the lamp itself (including high-quality LED chips, good driving power supply and heat dissipation structure), the service life of the Anti-glare LED Panel Light is roughly between 30,000 and 50,000 hours. However, this is only a rough range, and the actual service life needs to be determined based on the specific product quality and use environment.
